email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

lathes.co.uk
Machine Tools Sold - Page 8
Page 1  Page 3   Page 4   Page 5   Page 6   Page 7   Page 8


SOLD: GEO. TAYLOR Vertical Milling Machine. A very high quality though older machine. Converted from flat to V-belt drive with 3/4 h.p. 1-phase motor giving 8 spindle speeds. Fitted with a Dewhurst reversing switch and push-button starter. Table 18" x 5" with power feeds. Stored for 18 months; complete but in need of cosmetic restoration. Located in Hampshire. £275   Pictures of the Geo. Taylor miller for sale here and details of Geo. Taylor millers here

SOLD: ADEPT No. 1A hand-operated shaper - complete and original. Table 4.5" x 4", with a 3.5-inch high vertical T-slotted backing face and a ram travel of 4" £275 Phone: 01388-608132  Pictures of the Adept hand-shaper for sale here and details of Adept shapers here

SOLD: MYFORD Super 7 lathe 3.5" x 19" hardened gap-bed, backgeared and screwcutting. Mounted on the maker's industrial cabinet stand with chip tray and levelling blocks.  3-jaw chuck, 4-way toolpost, precision keyless tailstock chuck, faceplate, thread-dial indicator, graduated handle to leadscrew end and light unit. In good working order - but only a 1/4 h.p. 1-phase motor fitted (which was adequate for my lighter work) £850 However, the lathe is available on is own for £650 and the Industrial Cabinet for £350
Pictures of the Myford Super 7 for sale here and details of Myford Super 7 lathes here

SOLD: Small Vertical Milling & Drilling Machine. Table 15" x 4.25" with zeroing micrometer dials. Spindle nose has a Myford 1.125" x 12 t.p.i. thread, a No. 2 Morse taper and is bored to take a draw bar. The quill is fitted with both a fine-feed (handwheel) control and a quick-action lever giving 3.5" of travel. Maximum clearance between spindle nose and table 10". Fitted with a single-phase motor and Dewhurst reversing switch that gives (via a mid-position jockey pulley) 9 speeds. The machine is in good working order with no damage or abuse although all feeds have the expected small amount of backlash. The spindle and drive assembly operates smoothly and quietly with no play in the bearings. Included are a small machine vice and a Jacobs chuck. £350  Phone: 01388-608132 or 07891-325631  Pictures of the Mill/Drill for sale here

SOLD: TYZACK Professional-quality Universal Woodworker: Planer, Saw bench and Mortising Unit. Heavy cast-iron construction. Planer top 50" x 9.5",  saw table top 32" x 26" with a 15" blade. 3-phase electrics. In excellent, original condition. A bargain at £950
SOLD: ELU pull-down saw. 1-phase. £75 

SOLD: Horizontal band-sander (Linisher)  3-phase £275 

SOLD: VICEROY 5" x 24" Mk. 2 lathe with screwcutting gearbox, power sliding and surfacing, single lever engagement of backgear and a No. 3 Morse taper tailstock.  Mounted on the maker's underdrive cabinet stand with splash back and tool tray. 1-phase motor with push-button starter. Equipped with: 3-jaw chuck, two 4-jaw chucks, 4-way toolpost, catchplate, a spare chuck backplate, tailstock chuck and Morse centres. In very good original condition, even to the maker's paint finish. This well-built lathe offers a lot of capacity on a small footprint. £850 Pictures of the Viceroy lathe for sale here and details of Viceroy lathes here

SOLD: Cowells miniature precision milling machine with many extras and a number of useful refinements: original pulleys replaced by others to suit a stronger and smaller type of belting resulting in a much more quiet (and stronger) machine.  Micrometer dials added to the handwheels ; the dials can be turned ( and thus set to zero) independent from the handwheels.  A strong spring for the quill down-feed, eliminating backlash. Provision for stop screws left and right on the top slide.  Original control board replaced by a Lenze ( a top quality German brand).The accessories include :

Cowells collets 3-4-5-6-7-8-9-10 mm. Cowells drill chucks 0-4 mm and 0-8 mm. An improved Cowells machine vice and Cowells angle plate. Professionally-made dividing attachment including 9 Swiss Aciera division plates 50-59-60-62-72-90-96-110-180.  A number of professionally (much finer than Cowells) made items: boring arbor; saw arbor to suit saws with different hole sizes; cutter arbor for 7 mm hole cutters ( like Thornton) and a very fine miniature dividing table (useful for e.g. crossing out wheels).One grub screw needs to be replaced; there is some play in the spindle of the dividing attachment (thus far compensated by a brass strip between spindle and the body), and the top slide shows up a few minor marks which do not interfere with the accuracy of the machine. Price 1750 GBP. Note : new price at the moment 2600 GBP without the important accessories mentioned under (d) and (e). The machine is in the Netherlands but at an extra cost (150 GBP) I am happy to bring it across the Channel (or elsewhere in Europe within 600 km from my place) Pictures of the Cowells miller for sale here and details of Cowells machines here

SOLD: Colchester Master Mk. 1.5 (safety power-feed apron type) 6.5" x 36" circa 1968.

In good working order and complete with dual English/metric screwcutting gearbox, 8-inch 3-jaw chuck, 10-inch 4-jaw chuck, fixed steady, faceplate, Dickson quick-set toolholder with eleven standard tool holders (some pattern, some home made), one V-holder, one MT2 holder and one parting tool holder. A rear-mounted Dickson quick-set toolholder,  Morse-taper adapter bush for the spindle (this is usually missing), coolant system and the chuck spanner. 3-phase electrics with 2-speed motor. £795
I also have a 1.5 kW dual-voltage 1-speed 3-phase motor that would be useful in order to convert to inverter variable-speed drive - available to the lathe purchaser at a good price if required. The price can be reduced if the buyer does not need both quick-set toolposts.
Pictures of the Colchester Master lathe for sale here and details of Colchester lathes here

SOLD: Myford Super 7B lathe 3.5" x 19" with Screwcutting Gearbox, Power Cross Feed, gap-bed and backgeared. Mounted on the maker's late-type industrial cabinet stand with built-in electrical switchgear (1-phase motor), levelling blocks and deep chip tray. In superb, very lightly used condition (I am the second owner). Equipped with: Burnerd 3-jaw chuck with both sets of jaws, 6-inch half-depth 4-jaw chuck, fixed steady, thread-dial indicator, a graduated handle to the leadscrew end, faceplate, catchplate, tailstock revolving centre, two tailstock chucks, a very good selection of cutting tools including a set of three Jones & Shipman toolholders, a parting-tool holder, adjustable boring tool, the correct oil gun, spanners and a number of other useful items. £2950  Pictures of the Myford Super 7B for sale here and details of Myford lathes here

SOLD on behalf of a charity (spadework.org.uk): Axminster M950 Variable-speed wood turning lathe with swing headstock, 5 piece standard turning tool set and tailstock rotating centres. Complete with floor stand and 150 & 300 mm tool rests. 1-phase motor with speeds spanning 480 to 2400 RPM with variomatic speed control. Distance between centres 990 mm with a maximum diameter over bed of 350 mm. Weight 95 kg,  In excellent, lightly-used condition. £240  (about half the last list price).

SOLD: Adcock and Shipley Combination Machine - the smaller, compact version--consisting of: a backgeared and screwcutting 4" x 24" lathe with power feeds, a vertical milling machine, a horizontal milling machine (with both end and intermediate arbor supports) and a drill. In full working order (except for the grinding head, which is missing). Included are around 80 larger end mills, 40 INT tooling for the miller with a large endmill chuck with its special adapter for small mills; an ordinary size INT 40 Clarkson chuck, a new, unused horizontal arbour still in its packing and numerous small and large diameter end-mills and various face cutters.  Just completely dismantled, stripped bare and cleaned, painted and renovated. A rare opportunity to acquire a complete workshop in one unit. £1995 Pictures of the Adcock & Shipley Combination machine here and details of Adcock & Shipley Combination Machines can be found here.

SOLD: PALLAS HO Horizontal Milling Machine with vertical head. In generally good mechanical condition, but the original coolant fittings and power-feed drive shaft to the table are missing. A previous owner's replacement for the latter is ingenious, but does need improvingā€¦. Original BESA-taper arbor (included) is badly worn, but I made a replacement using a collet chuck body. Main drive-belt has had little use. Motor is a 1-phase. Presently, and virtually unused, it is in a model-engineering club's workshop in South Dorset. £295 or offers. Please phone Nigel on: 01305-812253 

SOLD: Hobbymat BFE65 Vertical Milling Machine. One owner from new. Fine and quick-action drilling feeds. Table 160 mm x 450 mm. All-geared head with 4 speeds from 315 to 1600 r.p.m. Complete with a collet nosepiece and a full collet set. 1-phase electrics. A very compact miller, unused for several years but in full working order and ready to use. £475 Pictures of the Hobbymat milling machine for sale here and details of Hobbymat millers at the bottom of this page

SOLD: late-model Boxford ME10 5" x 24" lathe with screwcutting gearbox and power cross feed. One private owner from new, little used and in superb condition. Mounted on the maker's cabinet stand with the proper type of compact ME10 drive system, chip tray, splash back. Well equipped with: coolant equipment (with fluid), T-slotted cross slide, Burnerd 3-jaw chuck, the correct 6-inch half-depth body Burnerd 4-jaw chuck (hardly used), quick-set toolholder, Keats type faceplate mounting work holder, thread-dial indicator, rotary table, tailstock chuck, tailstock rotating centre, faceplate, catchplate, cross-slide threading stop and adjustable boring bar. 1-phase electrics with built-in switchgear  £2250 Lathe in Epsom, Surrey. Pictures of the Boxford lathe for sale here and details of Boxford lathes here

SOLD: Hobbymat MD65 lathe 2.6" x 12" (65 mm x 300 mm) with screwcutting. One owner from new and very well equipped: 3-jaw chuck, Burnerd 4-jaw chuck (as new), collet set, 2 spare chuck backplates to match the spindle nose, two tailstock chucks, tailstock rotating centre, the maker's angle plate (mounts the top slide for milling), Morse centres, turning tools, set of slitting saws, die holders, etc. 1-phase reversing motor. Unused for several years but in full working order and ready to use. £475 Pictures of the Hobbymat lathe for sale here and details of Hobbymat lathes here

SOLD: Holbrook Minor Precision Toolroom Lathe. 5" x 24" Hardened and ground bed, infinitely-variable spindle-speed drive from 80 to 3000 r.p.m. and independent variable-speed control to the power sliding and surfacing feeds. Well equipped with:  Wizard DRO system, coolant, 3-jaw chuck, 4-jaw chuck, Quick-change Dixon Toolpost, faceplate, catchplate, thread-dial indicator, micrometer dial on tailstock handwheel, fixed steady, precision keyless tailstock chuck, Morse centres, light unit, tooling and other fittings. Full working order on 3-phase electrics (can be demonstrated working) and also ideal for conversion to inverter drive from 1-phase. £2250 Pictures of the Holbrook Minor for sale here and details of Holbrook Minor lathes here

It's goneā€¦. Fee to a good home: Booth Brothers Antique Lathe - the only one known. Phone: Chandlersford 0238- 0261815. Suit enthusiast rebuilder and includes two 3/4''contempory chucks. Click here for pictures

SOLD: Potts classic high-speed milling and grinding spindle. Can be used to hold milling cutters or as a toolpost grinder, etc. Complete with a 1-phase motor, the drive pulleys and in perfect working condition. Can be posted. £175
Pictures of the Potts attachment for sale here and details of Potts products here

SOLD: AXMINSTER Model M950 wood-turning lathe with swing headstock (that can be positioned anywhere on the bed), variable-speed drive and mounted on the makers legs with lock-down castor attachments for ease of moving about. Complete with top-of-the-range Supernova chuck, tailstock chuck, bowl-turning attachment with curved rest. set of chisels, calipers, wood-drive and rotating Morse centres, etc. 1-phase electrics with push-button starter. One owner from new, little used, in perfect working order and ready to run with everything needed. £295 Picture of the Axminster wood-turning lathe for sale here

SOLD: MYFORD Super 7B lathe 3.5" x 19" with screwcutting gearbox and power cross feed. Mounted on a very good metal-framed bench and in excellent original condition and complete with: Burnerd 3-jaw chuck with both sets of jaws, the correct half-depth body 6-inch Burnerd 4-jaw chuck, a Myford swivelling milling slide of the later 2-bolt-per-axis type. Dixon Quick-set tool holder, 4-way toolpost, standard toolpost, faceplate, catchplate, two tailstock chucks, tap holder, Morse centres, a number of extra screwcutting changewheels and a graduated handle to the leadscrew end. 1-phase Brook-Crompton motor with push-button starter and wired with armoured cable. £1950 Phone: 07960-605645 (located Berkshire) Pictures of the Myford Super 7B for sale here and details of Myford Super 7 lathes here

SOLD: BOXFORD VSL lathe. A late-type, top-of-the-range all-metric Mk. 2  5" x 20" on the underdrive stand with splash-back and tool tray. Variable-speed drive, screwcutting gearbox, power cross feed, large spindle bore (1.375"), push-button spindle lock and a LOO spindle end for safe reversing.

Very well equipped and offered as a complete package in a ready-to-run state with: Newall DP700 2-axis DRO (bought new), Burnerd 5-inch 3-jaw chuck with both sets of jaws, Burnerd 8-inch 4-jaw independent chuck, ER32 collet chuck, T-slotted cross slide with a set of T-nuts, the rare large-diameter micrometer dials, 2-gear metric thread-dial indicator, Genuine Dickson S0 type Quick Change Toolpost with 12 holders including standard, boring and parting-off. Genuine Boxford fixed and travelling steadies, spindle-nose adapter,  tailstock rotating centre, tailstock chuck, faceplate, catchplate, Kinematic DTI holder, an assortment of Morse centres, special spinning rest, a set of 16 mm CCMT06 insert cutting and boring tools, 12 mm shank insert boring tool, a set of 12 mm cutting tools with TCMT110204 inserts, a chuck guard, the comprehensive lathes.co.uk supplied user's manual and parts lists, operating instructions and set-up guides (etc) for the inverter and DRO and all the necessary chuck keys, spanners and Allen keys. 3-phase motor driven by a Siemens 1.5 h.p. 1-phase to 3-phase inverter that provides variable-speed drive (in addition to the main mechanical variable-speed control). Emergency-stop foot switch is operational and coolant fitted but not wired.

The lathe is in excellent condition with no major faults. The bed ways show little signs of any wear and overall it is a pleasure to operate. New original makers cross-slide and top-slide feed screws and nuts are included. Only for sale due to replacement by a larger lathe. £2250  Pictures of the Boxford VSL for sale here and details of Boxford lathes here and here

SOLD: MYFORD Super 7B lathe 3.5" x 19" with screwcutting gearbox, power cross feed, gap-bed, backgeared and spindle clutch (Serial number SK124409M). Comprehensively equipped with: leveling blocks and deep chip tray, Myford swivelling vertical milling slide with the correct maker's machine vice, dividing head with 3 indexing plates and tailstock, full metric screwcutting gearbox conversion set, micrometer boring head, set of collets and collet nose piece, Burnerd 3-jaw chuck, the correct half-depth body Burnerd 6-inch 4-jaw chuck, Myford/Dickson quick-set 3-way toolholder, standard toolpost, quick-set rear toolpost using a separate Dickson holder, fixed steady, travelling steady,  tailstock rotating centre, tailstock chuck, collet chuck and collets, graduated handwheel to leadscrew end, tailstock chuck, thread-dial indicator, Keats angle plate, standard Angle plate,  Myford faceplate (170 mm) , catchplate, set of  boring bars, set of flycutters,  Morse centres, a quantity of turning tools including carbide tipped and a compression knurl and the maker's Operation and Maintenance Manual and Bradley's "Book of the Myford".  1-phase Brook Crompton motor and non-reversing magnetic safety switch. This lathe and accessories are in excellent condition.  £2500 Machine in Belgium but at extra cost I am happy to bring the lathe and accessories to SE England or Benelux. Pictures of the Myford Super 7 for sale here  Details of Myford lathes here

SOLD: BURNERD Multi-size collets set on No. 3-D1 Camlock mounting to suit lathes such as all versions of the Colchester Bantam and Chipmaster and Harrison M250, etc. A complete set of 13 collets with sizes running from 1/8" to 2" with each collet adjustable over a range and so able to hold any size of bar stock. £350

SOLD: an immaculate SMART & BROWN Mk. 2 Model A toolroom lathe. 4.5" x 18" with screwcutting gearbox, power sliding and surfacing feeds and mounted on the maker's underdrive cabinet stand. Fitted with: 3-jaw chuck, 4-jaw chuck, 4-way toolpost, carriage stop, faceplate and catchplate. Original 3-phase electrics so ideal for conversion to variavle-speed inverter drive. In perfect working order and ready to use. £1550 Pictures of the Smart & Brown Model A lathe for sale here and details of Smart & Brown Model A lathes here

SOLD: Myford Super 7B lathe 3.5" x 19" with gap-bed, quick-change screwcutting gearbox and power cross feed. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. In excellent, carefully-used condition having been owned from new (1978) by my late Father (a Chartered Engineer) and kept in a heated, purpose-built workshop; has always been lovingly looked after and oiled with the correct lubricants. 1-phase motor, Dewhurst forward/reversing switch.
Very well equipped with a number of originally very expensive items including: Burnerd Super-precision Grip-tru 3-jaw chuck, a second 3-jaw chuck, two 4-jaw independent chucks, Myford swivelling vertical slide, Myford dividing attachment, Myford collet set with inch and metric collets complete in the wooden box with nosepiece and loading tool, Dixon quick-set tool post with 13 holders for standard, boring and parting tools, fixed steady, travelling steady, boring head attachment, the makers 4-way toolpost,  vernier height gauge, 4-inch rotary table, thread-dial indicator, graduated handle to lead screw end, 3 tailstock chucks, 2 rotating tailstock centres, large faceplate, 3 standard faceplates, Keat's Angle plate (for faceplate mounting), catch plate, drive dogs, Morse centers, a quantity of assorted HSS tooling, the maker's plastic dust cover, a tin of touch-up paint and the original Operation & Parts Manual, etc. This is a really lovely machine; the photos do not do it justice! £3500 Pictures of Details of Myford Super 7 lathes here and details of Myford lathes here

SOLD: Sixis 101 Universal Precision Milling Machine mounted on the maker's cabinet stand (with chip tray and door-enclosed storage on both sides). A fine example, in perfect working order, of a machine intended for high-accuracy work on small components. The table X and Y feed screws are brand new maker's originals from an Aciera F1 - and since then the machine has sat unused in a private workshop. Metric graduations on the micrometer dials with, on the longitudinal and traverse feeds, one rotation of the handwheel giving 2 mm of travel and on the vertical feed just 1 mm. Spindle collet taper Schaublin Type F12. Well equipped for both vertical and horizontal milling with all the accessories and tools shown in the photographs. Fitted with the maker's original 2-speed, 3-phase motor driven by a variable-speed 1-phase to 3-phase inverter supplied by Drives Direct. In conjunction with the 2-speed gearbox this arrangement gives a range from 125 to 4000 r.p.m. The miller unbolts from the stand for easy transportation by car. £2500  Pictures of the Sixis 101 for sale here and ddetails of Sixis millers here

SOLD: Contour Minor Numerical Control Milling Machine.
Bed size 13.75" x 5" with an X travel of 6 inches, Y of 4 inches and Z (vertically) of 6 inches. This is a compact, bench-top machine with a case size 32 inch wide, 29 inch front to back and 32 inches tall. The machine is running on Mach 3 software, meaning that manual control is removed to the keyboard (instead being on the front panel. All axes are fitted with ball screws for greater accuracy and included is a quick-change collet chuck (with one 6 mm collet) the computer and a Dell monitor.

Being in its original maker's finish and very little used from new, the miller is in superb condition. Enormous fun to use - and very versatile. £975  Pictures of the Contour Minor Computer-controlled miller for sale here

SOLD: Vertical Miller/driller supplied by Graham Engineering (Taiwanese manufacture) in the 1980s (hence has proper metal handles and a heavier build than later examples). One model-engineer owner from new. Table 17" x 8", powerful 1-phase motor, No. 3 Morse taper in the quill, full set of cutters, No. 3 Morse cutter holders, fly cutter and two vices, one of which tilts. Lots of vertical travel on the main column and fitted with both fine and quick-action drilling feeds to the quill. Unused for some time. £475  Pictures of the Miller/Driller here

SOLD: Superb British-made IME watchmaker's lathe with an extra long bed in tool-steel bed with double feet. Complete with a screw-feed compound slide rest (with the top slide having the optional super-fine feed right-angle drive, the maker's countershaft unit, two Burnerd precision ring-scroll 3-jaw chucks with face-reversible jaws, flip-up T-rest, between-centres drive plate, tailstock chuck and a good set of wire and cone collets and a collet draw bar. £1250 Lathe in Hampshire - but can pack and post if required.  Pictures of the IME lathe for sale here and details of IME lathes here

SOLD: Myford Super 7B lathe with screwcutting gearbox, power cross feed and mounted on the maker's cabinet stand with deep chip tray and levelling blocks.
Bought as a retirement present, the lathe has never been used A late-model machine mounted on the maker's cabinet stand with deep chip tray and levelling blocks. 1-phase motor with a factory fitted combined reversing and safety No-volt release switch. 3-jaw chuck, Dickson quick-set toolholder, thread-dial indicator, faceplate, catchplate, graduated handle to leadscrew end. A rare opportunity to acquire a perfect Super 7. £4500 Pictures of the lathe for sale here and details of Myford lathes here

SOLD: Myford ML7 lathe 3.5" x 20" gap-bed, backgeared and screwcutting.
As a retired marine chief engineer I have spent 50 hours completely stripping and rebuilding this lathe. All slides honed, bushes dressed, etc. New belts. Complete with: 3-jaw chuck with both sets of jaws, the correct half-depth-body 6-inch Burnerd 4-jaw chuck, tailstock chuck, tailstock rotating centre and a set of screwcutting changewheels.  1-phase motor.  £725  Can assist, if required, with delivery at buyer's expense. Pictures of the ML7 lathe for sale here and details of Myford ML7 lathes here

SOLD: Aciera F3 Universal Precision Milling Machine with metric graduations.
This highly versatile miller has had little use and is in excellent condition - for example, the table feed screws feel like those on a new machine and have no backlash. Complete with a large number of rare, desirable and originally very expensive accessories including: Standard vertical head for W20 collets, slotting head, the very rare high-speed head (2000-6000 r.p.m.) to take W20 collets. Rotary table (Part No. 345), fast dividing head with chuck (Part No. 347). A complete universal dividing head with 3 division plates, chuck and tailstock (Parts Nos. 343 and 342). Inclinable vice (Part No. 335 and originally from another F3), Wohlhaupter UPA-2 boring head, centering microscope, extra long bed with T-slot (Part No. 340i) for use with the dividing head.  Universal swivelling and tilting table, plain table and the special inclinable table (Part Nos. 333, 331 and 330). A large collection of metric arbors and toolholders. A set of NEW collets from 3 to 16 mm in steps of 1 mm. The other collets (every half mm from 1.5 to 18.5 mm ) are little used.  Also included (but not shown in the pictures) are numbers of small tools and fasteners, etc., .3-phase 380-420V 2-speed motor so ideal for conversion to variable-speed inverter drive. The accessories and tooling are contained in the maker's proper tool cabinet (though this is from another machine and needs a respray. I have the original key).  The machine can be picked up in Sweden Pictures of the lathe for sale here and details of Aciera F3 millers here

SOLD: Aciera F3 Precision Universal Milling Machine with vertical and horizontal capacity.
Since acquisition its only use has been for light model engineering work and the table is in excellent condition. Complete with the horizontal milling support arm/drop bracket, three milling arbors for horizontal work and six W20 collets for holding cutters when vertical milling. Runs well and is a nice, accurate machine with metric calibrations. 3-phase electrics so ideal for conversion to variable-speed inverter drive. £1600 Pictures of the Aciera F3 for sale here and details of Aciera F3 millers here

SOLD: BCA Mk. 111 Universal Jig Boring & Milling Machine mounted on the maker's cabinet stand. 8" rotary table on compound slide with X and Y travels. Swivel head. Well equipped. 1-phase electrics. Light unit. Pictures of the BCA jig borer for sale here and details of BCA jig borers here



SOLD: EXE miniature surface grinder. Fitted with a 12" x 6" magnetic chuck, a very large selection of grinding wheels, a dust-extraction unit and a light. Mounted on a very substantial steel bench. Grinder is 3-phase, the dust extractor 1-phase. These very useful machines rarely come onto the market. £950 Pictures of the EXE grinder for sale here and details of EXE miniature surface grinders here



SOLD: a late Model "12-inch" Atlas with screwcutting gearbox, power cross feed and mounted on the maker's underdrive cabinet stand with 1-phase motor and 12 speeds from 40 to 2072 r.p.m. The final and improved version of the long-lived Atlas this model has a 6-inch centre height (150 mm) and 24 inches (600 mm) between centres. This history of the machine is known: built 1961 and used in a factory to turn plastic blanks; as the second private owner I've used it for 37 years for model engineering. Equipped with: with 5-inch 3-jaw chuck, 8-inch 4-jaw chuck, faceplate, fixed steady, 4-way toolpost, single toolpost, tailstock chuck and the maker's comprehensive Operator's Operation Manual and Parts List. In full working order and ready to use. This is a well-specified lathe that offers a lot of turning capacity on a very compact footprint. £1250 Pictures of the "12-inch" Atlas for sale here and details of Atlas 12-inch lathes here



SOLD: Raglan "Little John" 5" x 24" lathe backgeared and screwcutting with power cross feed. Mounted on the maker's cabinet stand with chip tray and storage cupboards. Variable-speed drive from a 1-phase motor with reversing switch. 3-jaw chuck with both sets of jaws, 4-way toolpost, thread-dial indicator, two tailstock rotating centres, tailstock chuck, catch plate, magnetic base and DTI, turning tools, boring bar holder, drive dogs, etc.  In full working order and ready to use. £495 Pictures of the Raglan lathe for sale here and details of  Raglan lathes here



SOLD: Myford 254 PLUS lathe. 5.34" x 24" with hardened bed, screwcutting gearbox, power cross feed, the powered vertical milling head, T-slotted milling table and fully-protected leadscrew. Mounted on the maker's full cabinet stand with chip tray and splash back. This top-of-the-range Myford lathe has had only the lightest of use - it was in the workshop of a Girls' Boarding School. Equipped with: 3-jaw chuck, 6-inch 4-jaw chuck, Myford spindle collets, standard toolpost, quick-change toolpost with 3 standard holders and one parting-tool holder, 2 drill chucks, worklight, Morse centres, a number of turning tools and the correct oils Also included are the operation and maintenance manuals for the lathe and milling attachment. Fitted with a 3-phase motor - so ideal for conversion to inverter-controlled variable-speed drive.  £4,750  Pictures of the Myford 254 for sale here and details of Myford 254 lathes here



SOLD: Amoco self-powered vertical milling attachment with 1-phase motor. The base plate is to fit a Series 7 Myford (either ML7 or Super 7) - but could be adapted to other small lathes. No. 2 Morse taper spindle with a Myford threaded nose and collet-compression cap. £375 Can pack and post at cost. Pictures of the Amolco milling attachment for sale here and details of Amolco attachments here



SOLD: Pools Tool Company of Nottingham horizontal milling machine with a supplementary vertical head made by a previous owner. All-V-belt-drive with single-phase electrics. This very tidy machine has a 14" x 3.75" table and is mounted on a wooden cabinet with four drawer of cutters, arbors, parallels, tilt vice, ordinary vice, angle plates, V-blocks and others items as shown in the photographs.  Also included is a very nice home-made dividing head with a 4-jaw chuck, two plates and a tailstock. Overall machine & cabinet size: height 44 inches, depth 32 inches and 22 inches wide. A very complete and useful kit, in excellent order and ready to use. £375 Pictures of the Pools miller for sale here and details of Pools milling machines here



SOLD: Schaublin 13 high-precision Universal Milling Machine with vertical and horizontal capacity. Variable speed drive; power table feeds and complete with the essential universal tilting and angling table. Also included is a Clarkson Autolock chuck. 3-phase electrics.  An opportunity to acquire a high-class machine at a modest price. £950 Pictures of the Schaublin 13 miller here and details of Schaublin 13 millers here



SOLD: Hauser high-precision jib borer type 2A3. Complete, in working order and fitted with a genuine Hauser circular table and the auxiliary end-of-table fitting faceplate and vertical slide designed to a variety of fittings identical to those employed on the miniature M1 Jig Borer Model. Also included is the (very rare) original maker's tool set including a centering microscope, cutter holders, collets and super-precision chucks, etc. 1-phase electrics.  £950 Pictures of the Hauser for sale here and details of Hauser jig borers here



SOLD: Myford Mystro wood-turning lathe. 11" swing by 40" between centres. 1-phase 0.75 h.p. motor with push-button starter with safety instant stop, swivel headstock and the maker's very large capacity bowl-turning attachment. The spindle runs in  taper-roller bearings, is driven by a Poly-Vee belt and has a plunger indexing arrangement fitted. The bed rails are chemically blued to inhibit rust. One owner from new and carefully used.  Well-made stand with metal base plinths and a wooden top. Extras include a wood-collet chuck by Multistar, tailstock rotating centre, tailstock chuck, wood-drive centre, a set of good quality (high-speed steel) turning tools and a number of very helpful instruction books by Raffan, Christense, Jones, Sing, Sherwin, Nish and Burningham. This is a complete package and ideal if you would like to have everything to hand to start woodturning or to move on from a lesser lathe. £650  Pictures of the Mystro for sale here and details of Myford Mystro lathes here



SOLD: the contents of an engineer's workshop: Vertex dividing head with tailstock and indexing plates (as new), micrometers, depth micrometer, surface plate, Dividing/indexing Unitby Marlco, height gauge, toolmaker's clamps, scribing blocks, try-squares, bore gauges, Morse taper test mandrels, tap & die sets, vernier calipers, digital calipers, punch sets, sets of stones, scribers, rulers, sets of BA nuts & bolts, V-blocks, milling machine-nuts and setting clamps, reamers, adjustable reamers, ordinary and hinged angle plates, analogue rev counter, bronze bars, metal stock and many other items. For sale as one lot - but priced accordingly at a bargain £450  Phone: 0208-310 4119 or mob: 07790-227599  Pictures of the equipment here



SOLD: Elliott Progress bench Drill with a No. 2 Morse taper spindle. A very high quality machine in perfect working order. Complete with a heavy-duty swivel-base machine vice. £225



SOLD: Tom Senior M1 Milling Machine. Full horizontal and vertical capacity. A very wide speed range that incorporates internal backgearing that allows the use of wide slab mills. Table 26" x 6" with power feed. Very well equipped: Coolant, Clarkson Autolock collet chuck, a second nearly new ER25 collet chuck with large collet set, quality Abwood machine vice, Nippy machine vice, fly-cutter set, V-blocks, lots of side and face cutters, slitting saws, slab mills, etc. 1-phase motor and in perfect working order. £1250
Pictures of the Tom Senior miller for sale here and details of Senior millers here



SOLD: Atlas lathe 5" x 24" backgeared and screwcutting with power cross feed. Mounted on the maker's legs and complete with; 3-jaw chuck, 4-jaw chuck, faceplate, set of screwcutting changewheels, 4-way toolpost, original "American" toolpost, thread-dial indicator, tailstock chuck and light unit. 16-speed all-V-belt-drive from a powerful 1 h.p. motor. For its compact dimensions this lathe offers a huge amount of turning capacity. Full working order and ready to use. £450. Help with delivery possible.
Pictures of the Atlas lathe for sale here and details of Atlas lathes here



SOLD: Drummond M-Type lathe 3.5" x 15" gap-bed, backgeared and screwcutting with automatic disengage to the carriage drive. Mounted on the maker's legs with a built-on countershaft with overhead drive (to power toolpost-mounted grinding and milling spindles). Complete with: swivelling vertical milling slide, three 3-jaw chucks, 6-inch 4-jaw chuck, V-block on adjustable slide base, set of screwcutting changewheels, rotating tailstock centre, large faceplate, tailstock rotating centre, standard catchplate, a rare shielded catchplate, hand T-rest with two lengths of T, angle plate, drive dogs, Morse centres and a very rare Drummond spindle in a cross-slide mount.  At the moment the machine is loosely assembled from storage.
Pictures of the Drummond lathe here and details of Drummond M-Type lathes here



SOLD: Harrison L5A Lathe. 5" x 24" with all-geared headstock, full screwcutting gearbox, power sliding and surfacing feeds, spindle clutch and gap bed.  Equipped with: 3-jaw chuck, 4-jaw chuck, quick-set toolholder, faceplate, thread-dial indicator.

Pictures of the Harrison L5 lathe for sale here and details of Harrison L5A lathes here



SOLD: Lorch KD50 Super-precision Bench lathe 50 mm x 185 mm. This machine has never been fitted with a motor - it was bought new in 1973 and used as a jig to set up transducer units to run concentrically, the spindle being turned by hand. This is a very, rare and sought-after model that takes 8 mm collets. Complete with two tailstocks, one lever-feed, the other screw. Precision ring-scroll 3-jaw chuck, 6-jaw chuck, 4-jaw chuck and a set of wire, fir-tree and step collets. Also included are a number of watchmaker lathe accessories including roller filing rests, hand T-rests, high-speed milling and grinding spindle, self-centering drilling spindles, Jacot drums, saw table, etc.  Maker's countershaft system. The whole unit is in superb, hardly used condition.
Pictures of the Lorch KD50 for sale here and details of Lorch KD50 lathes here



SOLD: Myford ML7 3.5" x 20" gap-bed, backgeared and screwcutting. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. Equipped with: Myford swivelling vertical milling slide, the correct screwed-body 4-inch Burnerd 3-jaw chuck, 4-jaw chuck,  Myford 4-way toolpost, fixed steady, graduated handle to leadscrew end, thread-dial indicator, a full set of screw-cutting changewheels, tailstock chuck and Myford Super 7 zeroing micrometer dials and feed screws. Just fitted with a new single-phase 0.75 hp motor controlled by a Dewhurst reversing switch. In excellent working order and ready to use. £675. The lathe is in York.  Pictures of the ML7 for sale here and details of Myford ML7 lathes here



SOLD: Hobson lathe 3.5" x 18" with all-geared headstock. This interesting and well-specified lathe is covered in detail here. Very well equipped and complete with: set of collets and spindle nose adaptor, 3-jaw chuck, 4-jaw chuck, full set of screwcutting changewheels, thread-dial indicator, faceplate, catchplate, an unused set of high-quality Eclipse turning tools, a number of other unused turning tools, parting-off tool holder with blade, tailstock chuck, Morse centres, etc. In one family since new, little used and in remarkably fine original condition. £550  Pictures of the Hobson lathe for sale here and details of Hobson lathes here



SOLD: Swiss MIKRON T90 Precision Plain-turning Bench Lathe with the rare No. 12 thread-chasing headstock. The lathe is well specified and includes: a quick-action lever-operated collet closer, standard screw-feed compound slide rest and tailstock together with 41 collets, two 3-jaw chucks, two 4-jaw chuck, tailstock chuck, a Mikron hand T-rest - all stored in a custom-made wooden box. Also included is a spare (dismantled) headstock £850  Located North Yorkshire.
Pictures of the Mikron lathe for sale here and details of Mikron lathes here



SOLD: Pittler C3 Precision lathe with trapezoidal bed and rotating carriage assembly. Mounted on the maker's stand and complete with a number of valuable and rare Pittler accessories including a Burnerd Super-precision Grip-tru 3-jaw chuck, three 4-jaw chucks, vertical milling slide, steadies, dividing attachments, rotary table, gear-cutting attachment, power-drive-to-top-slide fitting, high-speed grinding/milling spindle for toolpost mounting, sets of screwcutting changewheels and worms, hand T-rests, etc. There is also a period countershaft unit with wall or ceiling hangers. £1750. Lathe located Hereford. Pictures of the Pittler lathe for sale here and details of these remarkable machines here



SOLD: Colchester Student lathe 6.5" x 24" with a DRO system, detachable gap bed and coolant. Complete with 3 and 4-jaw chucks, faceplate, Dickson quick-set toolholder, a set of No. 2 Morse collets with adapter (ideal for precision work), tailstock chucks, thread-dial indicator and masses and masses of useful tooling--more than enough to run the lathe for many years. 1-phase electrics. In excellent working order and ready to use.  This lathe has been used for the 7-year construction of a superb built and very complex model bottling plant. £850 For more details please phone: Pictures of the Colchester Student lathe for sale here and details of  Colchester Student lathes here



SOLD: Coronet Major Wood Lathe and Wood Machining Centre. Mounted on a stout bench and complete with: planer/thicknesser attachment, mortising attachment, saw-bench assembly, long-hole boring steady, twin bed-mounted T-rests, faceplates and a good set of turning tools.. Fitted with the original "Gryphon" double-spindle 1-phase motor. £550  Pictures of the Coronet major lathe here and details of Coronet lathes here

SOLD: Myford Super 7B lathe 3.5" x 19" gap-bed, backgeared, screwcutting gearbox and power cross feed. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. In excellent, carefully-used condition having been kept in a heated workshop (inside the house); has always been swimming in the correct oils with the bed wipers replaced annually. Equipped with the correct 0.75 h.p. 1-phase Brooke-Compton motor, Dewhurst reversing switch and push-button starter, a complete Myford coolant system with separate tank and pump unit, Dixon quick-set toolpost with 4 holders, thread-dial indicator, graduated handle to leadscrew end, faceplate, catchplate, drive dogs, centres and some HSS tooling, original manual/price list/etc and a plastic machine cover. £2950 Pictures of the Myford Super 7B lathe for sale here and details of Myford lathes here

SOLD: Myford ML7 lathe 3.5" x 20" gap-bed, backgeared, screwcutting and fitted with the most useful spindle clutch. Well equipped with: 3-jaw chuck with both sets of jaws, 4-jaw chuck, a Myford 4-way toolpost, sliding tailstock die holder, faceplate, catchplate, thread-dial indicator, tailstock chuck, the original maker's oil gun, spanners and a copy of the book "The Myford Series 7 Lathe". 1-phase Brook-Crompton motor. In excellent working order. £850  Pictures of the Myford ML7 for sale here and details of Myford lathes here

SOLD: Harrison L5A lathe. 5.57" x 40" with detachable gap bed, screwcutting gearbox, power cross feed and a spindle clutch. Complete with: metric screwcutting translation gears, 3-jaw chuck, 4-jaw chuck, fixed steady, travelling steady, thread-dial indicator, collet set, spindle-nose Morse taper adapter, 4-way tool post, tailstock chuck, coolant system and a light unit.  Recently fitted with 1-phase motor and push-button starter, In good working order and ready to use. £795
Pictures of the Harrison lathe for sale here and details of Harrison L5A lathes here

SOLD: Emco "Emcomat" 7 lathe (3.5" x 17.7") with the maker's self-contained powered vertical milling head with fine and quick-action feeds. Mounted on the maker's cabinet stand with chip tray and locking storage. All-geared head with 2-speed lathe motor and 1-speed miller motor all controlled by push buttons on top of the headstock. The motors are 3-phase but included is a high-quality 1-phase to 3-phase converter. Spindle speeds span 65 to 2800 r.p.m. Complete with an Emco 5-inch 3-jaw chuck, faceplate, precision keyless tailstock chuck, an Emco milling vice and the maker's Operation, Maintenance and Parts Manuals. A very compact machine with a generous capacity and in excellent working order. £950  Pictures of Emco 7 for sale here and details of Emco 7 lathes here

SOLD: ManSon "Master" miniature lathe, possibly the only one in the UK. In fine, original condition and complete with the maker's motor and 4-jaw chuck. Generally acknowledged as the world's smallest "real" lathe; perfectly useable or, with permission, the ultimate mantelpiece ornament for the machine-tool enthusiast. The "Master" was a development of the original ManSon lathe and improved in several important areas. £650  Pictures of the lathe for sale here and  full details of Manson lathes can be found here and here

SOLD: Tyme "Little Gem" miniature wood-turning lathe. UK made, in as-new condition and mounted on a good baseboard. A very robust little lathe made to a high standard and fitted with sealed-for-life headstock bearings. Equipped with a genuine Parvalux 180 Watt variable-speed motor and built-in controller that gives spindle revolutions of up to 5000 r.p.m. Turns 100 mm in diameter over the bed and admits 220 mm between centres. Overall length 635 mm, width 190 mm and height 160 mm. Complete with a wood collet chuck and a set of Sheffield-made high-speed "micro" turning tools. £195 Pictures of the Tyme wood lathe for sale here

SOLD: an UNUSED Myford ML7 lathe 3.5" x 20" gap-bed, backgeared and screwcutting. Serial number K110527. Manufactured 1973 and in dry storage since. As the paintwork had become dull over time it's been resprayed in its original Myford grey.

Very well specified with: long T-slotted cross slide, a new Burnerd 3-jaw chuck (of the correct internally-threaded type) with both sets of jaws , a complete set of screwcutting changewheels, zeroing micrometer dials, thread-dial indicator, graduated handle to leadscrew end, catchplate, chuck backplate, deep chip tray and (used but mint) levelling blocks, Morse centres, the necessary spanners, Allen keys and maker's oil gun. New single-phase 1400 rpm 0.75 hp motor (or, as a no-cost option) a new 3-phase 0.75 h.p. motor with a new variable-speed 1-phase to 3-phase inverter.  A rare opportunity to acquire a new ML7 at £2750  Also available a brand new Myford Gearbox, the guards and all parts necessary, valued at £1,500, with full instructions for you to fit, supplied in original packaging and never fitted  for only £525.00  Pictures of the Myford ML7 for sale here and details of Myford lathes here

SOLD: Rodney Vertical milling attachment with base for Myford ML7 and Super 7 lathes. This is the larger of the two versions with both fine down-feed and a quick-action drilling facility Complete with Myford nose compression ring. £350 Picture of the Rodney/Myford Vertical Milling Attachment for sale here and details of Rodney attachments here

SOLD: Myford Super 7B Long-bed Lathe with power cross feed. 3.5" x 31" gap-bed, backgeared and screwcutting. In superb, little-used condition and complete with: two 3-jaw chucks, the correct half-depth body Burnerd 6-inch 4-jaw chuck, Myford-Dickson quick-set tool post with 4 toolholders, fixed steady, travelling steady, Myford machine vice, two rotating tailstock centres, thread-dial indicator, rotary table, V-blocks, graduated handle to leadscrew end, centres, drive dogs and turning tools, etc. 1-phase motor. £2250 (Lathe in Glasgow)  Pictures of the long-bed Myford Super 7B for sale here and details of Myford Super 7 lathes here



SOLD: Tom Senior Light Vertical Milling Machine. Fitted with the S-Type swivelling head with both fine and quick-action quill feeds along the axis of the No. 2 Morse taper spindle. Table 26" x 6.5". Powered by a Brook Crompton motor driven by a high-quality (Eurotherm) variable-speed inverter drive running from an ordinary 1-phase supply (the drive assembly cost in excess of £600). The miller is in excellent condition with only a few very minor marks on the table.  Looks to have been overhauled at some stage in its life and only used by me for light hobby work. Complete with genuine Clarkson Autolock collet chuck and ½" keyless drill chuck.  Metric leadscrews and 2MT quill.  £1699
Pictures of the Tom Senior Light Vertical Miller here and details of Tom Senior Millers here



SOLD: Myford VMB 9-speed vertical milling machine on the maker's cabinet stand. Spindle has both fine down-feed and a quick-action drilling quill and takes the common and inexpensive R8 fitting. Table 24" x 6". Equipped with a 3-axis Digital Readout. Speeds from 195 to 2340 r.p.m. Powerful 1-phase electrics with push-button starter. Little used from new, this is a suburb, sought-after machine with an excellent specification. Only selling because I need a larger miller for my next model and don't want to over work this one. £1599 with DRO unit - or available for £1200 without the DRO  Pictures of the Myford VMB vertical milling machine for sale here



SOLD: Excel Major Mill Drill Model M30 mounted on the maker's stand with chip tray. The traditional and useful mill/drill, this is the largest and most rugged version made. Table 8.25" x 28 .75", spindle has an R8 taper (Bridgeport type) and 12 speeds from 100 to 2,080 rpm. Quill has 5 inches of travel by either fine-feed handwheel or a quick-action capstan lever for drilling. Metric calibrations. Complete with: tilting vice, drill chuck, face milling cutter, set of metric collets and chuck and a machine guard.  3-phase electrics (fitted a powerful 1.5 Kw (2 h.p.) motor so ideal for conversion to inverter-driven variable-speed drive.  The miller has had very little use and is in superb order. £895 Pictures of the Excel vertical Miller/Driller here

SOLD: Emco Maximat V10-P lathe 5" x 24" complete with the maker's powered vertical milling attachment, 5" x 24", screwcutting gearbox, power cross feed and mounted on the correct cabinet stand. This is a very useful, single-phase, 10-speed machine, with imperial dials. Fitted: Elliot 5-inch 3 jaw chuck, tailstock rotating centre, thread-dial indicator, graduated handle to leadscrew end and the maker's original Instruction and Parts Manual.
The 4-speed milling head has a No. 2 Morse taper spindle and both fine and quick action feeds to the quill. Although slightly scruffy (and the electric cables needs replacing) this is a lathe with an impressive specification that is compact yet with a useful capacity and wide speed range of 50 to 2500 r.p.m. Sold as seen. £79 Pictures of the Emco Maximat V10-P for sale here and details of Maximat V10P lathes here

SOLD: Myford ML7 3.5" x 20" gap-bed, backgeared and screwcutting and fitted with a spindle clutch. Mounted on a sturdy bench and complete with: Myford milling slide together with the correct machine vice, Burnerd 3-jaw chuck, Burnerd 6-inch 4-jaw chuck, 4-way toolpost, graduated handle to leadscrew end, thread-dial indicator, chip tray, set of screwcutting changewheels and a catch plate. 1-phase electrics with Dewhurst reversing switch and a push-button starter. Owned by one family from new. £625 Pictures of the Myford ML7 lathe for sale here and details of Myford lathes here
Also still available - in nice, clean condition, a Drummond Sales Booklet from 1939/40: M-Type lathes £15  Phone: 01926-858012


SOLD: compact Edwards Folder/Bender - ideal for the smaller workshop. Capacity 25 inches wide. Little used from new and in perfect working order. £365  Pictures of the Edwards bender/folder for sale here



SOLD: Rivett 608 Precision lathe 4" x 20" backgeared with screwcutting gearbox and power sliding and surfacing feeds with auto pre-set knock off. Fitted with the useful (and inexpensive to tool) 5C collet spindle. Mounted on the maker's legs with chip tray and a 2-speed clutch/gearbox unit. Complete with: thread-dial indicator, carriage micrometer stop and the full Operation and Maintenance Manual. Just fitted new 1-phase motor and original reversing switch, The lathe and stand dismantle easily for moving. £850
Pictures of the Rivett 608 for sale here and details of Rivett 608 lathes here



SOLD:  Sharp bench-top universal milling machine with vertical and horizontal capacity. 16'' x 4.5'' table able to be swung 25° in either direction from central with 12'' of longitudinal travel, 4.5'' across and 10.5'' vertically.

New taper roller bearings and seals to both horizontal spindle and the swivelling vertical head and new drive gears to the horizontal drive. For horizontal work the drive passes through a lathe-like backgear system that multiplies the torque and reduces the speeds to ones more suited to horizontal milling.  One or two marks in the table ,but included in the sale is a brand new table including the feeds screws. Also included are spare new bevel gears for the knee rise and fall. Has Myford thread fitted to both spindles, and all equipment to convert to the horizontal mode. Fitted 1-phase cap-start, cap-run motor and push-button starter. Also included is a new dual-voltage 3-phase motor allowing the machine to be run from a variable-speed inverter. A very versatile but compact machine. £695  Pictures of the Sharp Universal miller for sale here and details of Sharp millers here



SOLD: Myford Super 7B 3.5" x 19" gap-bed with screwcutting gearbox and power cross feed mounted on the maker's stand with deep chip tray and levelling blocks.

An all-metric machine Serial Number SK151304M. The lathe has been stripped to bare metal and repainted in the correct shade of Myford Green. The following new maker's parts have been fitted: Myford Quick-change toolpost with six new holders, T-slotted cross slide and chrome feed-screw handle, all oil nipples, cross and top-slide handles and micrometer dials, both belts, apron and tailstock handwheels, thread-dial indicator, gearbox threading charts, all carriage and slide-way gib-strip screws & nuts, saddle felt wipers and housings and cork mats in the stand. Also included are: the imperial banjo and changewheel set for inch threading, 3-jaw chuck with inside and outside jaws, the correct half-depth body Burnerd 6-inch 4-jaw independent chuck, tailstock drill chuck, faceplate and catchplate, the maker's Instruction Manual and the special Gearbox Manual and a new lathe dust cover. New 1-phase 0.75 h.p. motor  with push-button starter and Dewhurst reversing switch. £4450 Pictures of the Myford Super 7 for sale here and details of Myford lathes here

SOLD: BCA Jig Borer & Milling Machine mounted on an excellent metal cabinet with drawer storage and light unit. 8-inch T-slotted rotary table with precision toolmakers' vice, micrometer boring head, collets and cutters. Standard and extra-fine feed to the head. Driven from the original 3-phase motor by a 1-phase to 3-phase inverter giving infinitely variable speed drive. This machine has been in the long-term ownership of a clock maker and is in superb working order. £1950 Pictures of the BCA jig borer/miller for sale here and details of BCA machines here   Also available a genuine BCA maker's stand £250

SOLD: MYFORD Super 7B with screwcutting gearbox, power cross feed and mounted on a good cabinet stand with levelling blocks and deep chip tray. This lathe is in superb, lightly-used condition having had just one very careful clockmaker owner from new. Very well equipped with a range of valuable accessories including: a complete overhead motorised drive system to power toolpost-mounted grinding and milling spindles, boxed collet set, nosepiece and loading tool, Burnerd 4-inch 3-jaw chuck, the correct Burnerd 6-inch half-depth-body 4-jaw chuck, 5-inch 4-jaw chuck, precision micrometer boring head, Dickson quick-set toolpost and many toolholders including boring and a clamp-type knurling tool, a very rare miniature Clarkson Autolock chuck on a No. 1 Morse taper, two high-speed milling spindles, pinion and wheel-cutting equipment including dividing plates, Myford swivelling vertical milling slide of the improved two-bolt type with the correct machine vice and special raiser block, angle plates, precision keyless tailstock drill chuck, two standard tailstock drill chucks, fixed steady, Myford saw bench assembly, hand T-rest, hand-crank for turning the spindle at slow speeds, bronze drive dogs, pin chuck, fusee grooving tool, roller filing rest, Morse centres, thread-dial indicator and a graduated handwheel to the leadscrew end. Also fitted is a large micrometer dial on the carriage traverse handwheel and a quick-release fitting on the top-slide screw. £3750  Pictures of the Myford Super 7 for sale here and details of Myford Super 7 lathes here

SOLD: Beaver TC10 CNC Machining Centre. Only 30 hours turning from new - the lathe was used as an instructional device in Brunel University, Bristol. Works as a lathe and milling machine with 90-degree and straight milling heads, powered tailstock and lots of tooling. Having been unused for a couple of years, it will need recommissioning.  Includes all the operation manuals and full documented history. £2995 Pictures of the Beaver CNC machining centre here

SOLD: Myford 254 Plus lathe 5.34" x 24" with hardened bed, screwcutting gearbox, power cross feed, 2-axis digital readout and mounted on the maker's cabinet stand with splash-back and tool rack.  Separate power shaft for the sliding and surfacing feeds, fully enclosed leadscrew, large micrometer dials and a fully integrated 1-phase electrical system. Imperial graduations and D1-3 spindle nose. Well equipped with: 3-jaw chuck, the correct 6-inch half-depth body 4-jaw chuck, quick-change tool post with 7 holders, rear toolpost on raiser block, T-slotted cross slide, thread-dial indicator, tailstock chuck, Morse centres, large faceplate, catchplate and Low-Vo light unit, etc. It also benefits from an Allendale Electronics digital readout on the tailstock barrel and all the original tools, spanners, maker's Instruction and Parts manual and the hardened headstock spindle nose adaptor.  In superb condition having had just one model-engineer owner from new. A very accurate lathe that produces high quality surface finishes. £4250  Pictures of the Myford 254 for sale here and details of Myford 254 lathes here

SOLD: Haighton "Cadet" 2.5" x 8" miniature backgeared, screwcutting lathe, gap-bed lathe. Mounted on the makers cast-iron base and still in its original "craquellee" black-and-white finish. Complete with: 4-jaw chuck, 6-inch faceplate with dogs to convert to large diameter 4-jaw chuck, 4-way toolpost, tailstock chuck, a set of screwcutting changewheels and the original 1-phase motor. In splendid original condition £450 Pictures of the Haighton cadet for sale here and details of Haighton lathes here

SOLD: Boxford 4.5" x 20" CUD Mk. 2 lathe. Mounted on the maker's underdrive stand with splash-back and tool tray. Single-lever engagement of backgear and push-button spindle lock. New powerful 1-phase motor and push-button starter, 5-inch 3-jaw chuck, the correct half-depth body 6-inch Burnerd 4-jaw chuck, T-slotted cross slide, the rare metric thread-dial indicator (this is an all-metric machine) maker's 4-way indexing toolpost, light unit, centres, knurling tool, chuck guard, etc.  Sound, but in need of a cosmetic tidy. £650  Phone: 01845-597507  Pictures of the Boxford lathe for sale here and details of Boxford lathes here

SOLD: Raglan Vertical Milling Machine in excellent original condition mounted on the maker's cabinet stand with chip tray. Table 21" x 5.5" Variable-speed drive from 380 to 2250 r.p.m. 1-phase motor with push-button starter. Timken taper roller bearing spindle with a No. 2 Morse taper. £750  Pictures of the Raglan miller for sale here and details of Raglan millers here

SOLD: Vintage Mellor Capstan Lathe. Set on maker's heavy cast-iron "trumpet" stand with a heavy-duty countershaft and 3-phase motor. Equipped with power sliding and surfacing to the carriage. Also included (but not sown fitted) are belt guards. £375
Pictures of the Mellor lathe for sale here and details of Mellor lathes here

SOLD: Centec No. 2 Universal Milling machine with vertical and horizontal capacity. Refurbished by myself with many additions including: a vertical milling head (Bridgeport end section), 9-speed clutched V-belt drive, worm-and-wheel driven knee lift with DRO, stand and swarf tray. All the horizontal equipment: overarm, drop bracket and cutter arbor. Autolock collet chuck with a full set of unused ER32 collets included. Reversible 1-phase 240V motor, recently professionally rewound. A bargain at £450.
Collection from Girton, Cambridge. Pictures of the Centec milling machine for sale here and details of Centec milling machines here

SALE: Hobbymat MD65 lathe 65 mm (2.6") centre height by 300 mm (12") between centres. 1-phase motor with built-in switchgear including reverse. Appears to be very little used and complete with 3-jaw chuck and screwcutting changewheels. £425 (current new list price £999  Phone: 07914-605791  Pictures of the Hobbymat lathe for sale here and details of Hobbymat lathes here

SOLD: Harrison Union Graduate Bowl-turning lathe. Heavy, all cast-iron construction. Under-driven from a 1-phase motor with push-button starter. Fitted with the maker's large bowl faceplate and a wood collet chuck. In full working order ready to use.  £575 Phone: 01768-776885 or 07714-707253  Pictures of the Graduate bowl-turning lathe for sale here and details of Graduate lathes here  Also available: a professional quality double-ended grinder on a floor stand. 3-phase motor. £45

For Sale: a version of the Patrick "Popular" lathe. Approximately 4.5" x 18". Complete on a good metal stand with 1-phase motor and all-V-belt drive countershaft. Burnerd 4-jaw chuck, toolpost, etc. £275 or offers.
Phone: 01388-815363 or 07918-174913  Pictures of the Patrick lathe for sale here and details of Patrick lathes here

SOLD: Smart & Brown Model M toolroom lathe. 4" x 18" backgeared, screwcutting and with power cross feed. Mounted on the maker's underdrive stand with 1-phase motor. Complete with: collets, 3-jaw chuck, 4-jaw chuck, Dixon Quick-set toolpost (not the one in the pictures), travelling steady, a set of screwcutting changewheels, precision keyless tailstock chuck, quick-set toolholder. £950 Pictures of the Smart & Brown Model M lathe for sale here and details of Smart & Brown Model M lathes here




Page 1  Page 3   Page 4   Page 5   Page 6   Page 7   Page 8

lathes.co.uk
Machine Tools Sold - Page 8
email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories