Although pages in this section show a representative selection of Hendey machine tools, the following list gives a good indication of when a particular machine was introduced. The number remained assigned to the model long after it had gone out of production - or until the number was reassigned to a new design.
When W.P. Norton (of Norton screwcutting gearbox fame) joined the firm in 1886, a new number was allocated if an improvement was made to an older design - an explanation as to why the same type of machine is sometimes found listed against different numbers.
This is not intended as a detailed study of the Hendey products but a list of those made from 1870 to the 1920s.

A Machine Number left blank space indicates that no machine assigned to it:

1. Assigned to 16" Crank Shaper
2. 10" Hand planer Assigned to 20" Crank Shaper
3. 16" Planer Assigned to 24" Crank Shaper
4. 22" Planer Assigned to 16"-20" Crank Shaper
5. 24" Planer Assigned to 32" Crank Shaper
6. 27" Planer Assigned to 20"-24" Crank Shaper
7. 30" Planer Assigned to 24"-28" Crank Shaper
8. 15" Shaper
9. 22" Planer
10. 16" Planer
11. 16" Crank Planer
12. 15" Hand Lathe Turret
13. 12" Hand Lathe
14. 15" Hand Lathe
15. 18" Hand Lathe
16. 18" Brass Lathe
17. 20" Traverse Shaper
18. 24" Planer
19. 30" Traverse Shaper
20. 24" Centers
21. Pulley Lathe
22.
23. 3-Spindle Drill
24. 1-Spindle Drill
25. 15" Back Geared Lathe
26. 12" Back Geared Lathe
27. 2-Spindle Drill
28. Pulley Tapping Machine
29. 3-Spindle Drill (Large Size)
30. 10" Gang Slitter
31. 25" Shaper (also 28" Shaper)
32. Roll Finishing Machine
33. 15" Turret Lathe
34. 18" Engine Lathe
35. 10 Hand Lathe
36. Horizontal Boring Machine
37. Emery Grinder
38. Screw Press
39. Machine for Straightening Sheet Metal
40. 24" Shaper
41. Reducing Machine (Used to Produce Needles)
42. 12" Planer Centers
43. 9" Shaper Centers for 24" Shaper
44. Wire Machine
45. Multiple Spindloe Drill
46. 27" Planer (New Pattern)
47. 14" Engine Lathe
48. 16" Engine Lathe
49. 18" Engine Lathe (Heavy Pattern)
50. 15" Traverse Shaper
51. 15" Shaper Centers
52. 20" Turret Lathe
53. 2-1/2" Cutting Off Lathe
54. 30" Planer (New Pattern)
55. 21" Engine Lathe
56. 24" Engine Lathe
57. Cooper Brass Lathe
58. Hand Wheel Turning Machine
59. 30" Engine Lathe
60. Automatic Rack Cutter
61. #2 Milling Machine
62.
63.
64. 19" Shaper (Also, 20" Shaper)
65. Portable Shaper
66. Suspension Shaper
67. Combination Shaper
68. 4" Special Drilling Machine
69. 6Ft Traverse Shaper
70. 6-Spindle Boring Mill
71. 2-Spindle Vertical Milling Machine
72. Patent 14" Engine Lathe
73. Patent 16" Engine Lathe
74. 2"x4" Drilling Machine
75. 20" Hendey-Norton Engine Lathe
76. 12" Hendey-Norton Engine Lathe
77. 24" Hendey-Norton Engine Lathe
78. Center Grinding Machine
79. Automatic Drill Press
80.
81. #2 Lincoln Miller
82. #2-1/2 Lincoln Miller
83. #5 Lincoln Miller
84. #8 Lincoln Miller
85.
86.
87.
88. #4 Screw Machine (2" Capacity)
89.
90.
91. #1 Universal Milling Machine
92. #2 Universal Milling Machine
93. #3 Universal Milling Machine
94. #4 Universal Milling Machine
95. #2G Universal and Plain Milling Machine
96. #3G Universal and Plain Milling Machine
97. #2 Gear Drive Milling Machine
98. #3 Gear Drive Milling Machine
99.
100.
101.
102.
103. #3 Oscillating Milling Machine
104. #4 Oscillating Milling Machine
105. #5 Oscillating Milling Machine (Never Built) Ath