Rosenfors Millers Page 2


	email: t ony@lathes.co.uk Home Machine Tool Archive Machine-tools Sal e & Wanted Machine Tool Manuals Catalogues Belts Books Accessories Rosenfors RFE, RFV-M, RFU and Para-Mill-2 Milling Machines Rosenfors Millers Home Page A manual is available for these millers Rosenfors Lathes

RUB-5 powered overarm end fitting


	VRH Vertical Head. A simple plain (non-quill-feed) version with an internal gear arrangement that allowed the head to be stepped up to increase clearance between spindle nose and table to a useful, though still not generous, 360 mm

VR-2 Vertical Head. This unit was fitted with a double-swivel end that could be manipulated to increase the maximum nose to table clearance to 430 mm

For an extra charge either head could be fitted to a hinged bracket that allowed it to be swung into position when required - the drive being by a simple spur gear carried on a taper held into the spindle nose by a draw bar

Slotting Attachment Type SR. Distance from column 286 mm (11 inches); length of stroke 80 mm (3 inches)

Rack-cutting attachment Type KR. This unit was driven at the standard spindle speeds

Rotary table Type R-40M with power feed

Universal dividing Head Type D-13 with power feed and tailstock

Dividing Head type RKF with power feed. This unit was intended for straight dividing and, under power, helical milling. For production work a rapids gearbox unit was available that worked in both directions


	Rosenfors Millers Home Page A manual is available for these millers Rosenfors Lathes Rosenfors RFE, RFV-M, RFU and Para-Mill-2 Milling Machines email: t ony@lathes.co.uk Home Machine Tool Archive Machine-tools Sal e & Wanted Machine Tool Manuals Catalogues Belts Books Accessories