Favorite Lathes Page 2


	email: t ony@lathes.co.uk Home Machine Tool Archive Machine-tools for Sal e & Wanted Machine Tool Manuals Machine Tool Catalogues Belts Books Accessories Favorite No. 2 Watchmakers' Lathe - continued previous Lathe No. 2 lathe page Favorite Home Page Favorite Geneva Type No. 1 Favorite No. 3 Lathe Copies of Favorite Sales & Technical Specification Literature are available

With the lathe bed removed from its foot (a special quick-fitting was provided) it could be mounted in a bench vice and, with the use of two tailstocks, employed for "pivoting" work. Parts F39 and F5B below were part of the assembly.

Part F39 Runner with pulley - concentric when fitted to the stake and eccentric when mounted on the braoch

Part F5B broach extractor--holds the pivot broaches by conical adjustment

Part F36 universal runner with 3 plates for re-pivoting work (used in conjunction with the standard tailstock). Parts F36, F37, F37P and F38 were part of the assembly

Part F36 universal runner with 20-hole plate for watch work

Part 37P centring plate for small clock work with 7 holes

Part F37 centring plate for larger wall and alarm clock" work with 10 taper holes 1.10 mm to 6 mm

Part F38 Jacot drum pivot polishing (burnishing) device with 18 grooves

Part F27 Saw table - carried by the handrest assembly

Part F28 roller filing rest

Part 10685 set of 5 brass wax chucks


	Favorite No. 2 Lathe - continued previous Lathe No. 2 lathe page Favorite Home Page Favorite Geneva Type No. 1 Favorite No. 3 Lathe Copies of Favorite Sales & Technical Specification Literature are available email: t ony@lathes.co.uk Home Machine Tool Archive Machine-tools for Sal e & Wanted Machine Tool Manuals Machine Tool Catalogues Belts Books Accessories