Handbooks:

MR15
RAGLAN   "Little John" Mk. 1 & Mk. 2 Operator's Handbooks, Illustrated Parts Manuals, Accessories Lists and a wiring diagram for both Dewhurst and Stanton switches. There are two Manuals in this set, one early, one late (with complimentary information) and a later, separate  Illustrated Spares List. Three Sales and Accessories Catalogues are also included showing all  versions of the lathe as well as all the Accessories. This compendium of literature is a complete coverage of these interesting lathes which can be seen here: £30 inclusive.

MR15B
RAGLAN "5-INCH" Lathe (The later Raglan with a smooth, rounded-edge headstock cover and a hinge-open changewheel guard). Operator's Manual, Illustrated Parts Manual. Includes Sales and Accessories Catalogues & Special Screwcutting Supplement.  £30 inclusive

Also Available (if not shown prices are plus post and plus VAT):
DRIVE BELTS:
The correct variable-speed drive belt
£44 + £3 post and packing = £47 + VAT = £54.05
Unfortunately the correct V belts to drive the spindle from the lower shaft are no longer made. The only alternative is a "T-link" belt that is joined in sections. The belts should each be 686 mm long
so 1.380m 1.4m is correct to make up the two belts = 66 T-links. in this case £51.80 including post, packing and VAT

NEW 6.3-inch diameter backplates: fully machined and ready to fit: £48 + £8 insured post and packing = £56 + VAT
NEW 9-inch faceplates: fully machined and ready to fit £95 stock soon
NEW T-slotted cross slides for Raglan "Little John" £165 - to order
NEW T-slotted cross slides for Raglan "5-inch" £195 - to order
New Tumble reverse gears for the "Raglan 5-inch" £35 each - these can be in fibre or cast-iron and have 26 teeth.
New Tumble reverse gears for the "Little John" £35 each - these have 30 teeth
26t gear with extension to carry gear that meshes with main gear train: £48
New cross feed nuts in bronze: "Little John" and "5-inch" Models £42 + £3 post and packing = £50 + VAT
New top-slide feed nuts in bronze: "Little John" and "5-inch" Models £36 + £3 post and packing = £39 + VAT
New cross feed screws: "Little John" £65 + £3 post and packing = £68 + VAT
New cross feed screws: "Raglan 5-inch" £65 + £3 post and packing = £68 + VAT
Pinion gear (to engage with bed rack) Little John and 5-inch £42 + £3 post and packing = £45 + VAT
The Raglan 5-inch had one of two types; either a single diameter shaft or one with an increased diameter near the gear. Both are available.
Double gear beneath tumble gear £74 + £4 = £78 + VAT
NEW Leadscrew CLASP NUTS - Little John and "5-inch" - £68
New cross feed screws: "Little John": £57*
New cross feed screws: "Raglan 5-inch": £65*

The standard changewheel set included the following gears: 2 x 30, 32, 36, 42, 44, 45, 48, 52, 60.
These and other changewheels are available. Prices include post, packing and VAT

10t or fewer £18
11t to 20t £23
21t to 30t £26
31t to 40t £28
41t to 50t £34
51t to 60 t £36
61t to 70t £40
71t to 80t £42
81t to 100t £48
101t to 120t £55
120t to 140t £75
141t to 160t £85