email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

Mattsson & Zetterlund (Junger) VF-600
Vertical Milling Machine - Page 3
Continued on the Home Page and Page 2


Wire connecting vertical head to the weight within the column

Owners report that the maker's cylindrical mass was insufficient  to allow easy  up and down
movement of the vertical head - hence the addition, on this example, of two iron castings

Heavily constructed compound table - note the stout gib block on the cross feed; this was adjusted by bolts pressing against its lower face

The tapered-face, crisply engraved micrometer dials were given a non-glare, satin-chrome finish


A genuine Mattson & Zetterlund 250 mm rotary table with its characteristic low profile with a central hole 40 mm
in diameter to take a plug for Morse 2 or 3 taper. The unit was relatively light and extremely handy in use.

Micrometer dial and table stop. The dial, 58 mm in diameter, has the larger lines indicating
a feed of 0.1 mm and the smaller 0.05 mm. The table stop is graduated at 0.1 mm per line.

Lever to engage the head-mounted 5 : 1 ratio, speed-reducing lathe-like backgear assembly 


Continued on the Home Page and Page 2

Mattsson & Zetterlund (Junger) VF-600
Vertical Milling Machine - Page 3
email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories