Warco GH Universal Vertical Miller
- on www.lathes.co.uk -
SOLD: Warco Model GH Universal geared-head, single-phase, vertical miller mounted on the maker's stand. Fitted with power feed to the table, power elevation to the tilting head by a stepper-motor drive and a DRO system. Table 730 x 210 mm with a longitudinal travel of 500 mm and in traverse of 200 mm. Maximum clearance between table and spindle nose 470 mm and a spindle stroke of 130 mm. The head has the Bridgeport-type R8 collet fitting (allowing access to a variety of effective and inexpensive fittings) and included with the miller is a set of 19 collets and a collet chuck, a drill chuck, an arbor to take horizontal-type cutters, holders to take face-dog cutters and an R8 to Morse taper adapter. . The head bearings in the headstock and quill have all just been changed to top-quality ones by NSK. I have owned the miller since new and only used it for occasional, lighter work.
I would prefer pickup and can assist with loading - but it could be attached to a pallet and sent by courier at the purchasers costs.
Bought new by me and only lightly used, the machine cost new, with accessories, in excess of £3000. Offered at £1550.
- more advertisements here -
Some high resolution pictures--may be slow to open