email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Myford Super 7B Lathe

SOLD: Myford Super 7B lathe 3.5" x 19" backgeared and screwcutting, gap bed, mounted on the maker's late-type industrial stand with a full-length splash-back and a tool tray. Fitted with a screwcutting gearbox and power cross feed. One private owner from new and in superb, little-used condition. Comprehensively equipped with a vast range of useful items including: DRO system on the feds and a digital readout on the tailstock travel, 3-jaw chuck, 6-inch 4-jaw chuck, a smaller 4-jaw chuck, ER32 collet chuck complete; quick-set toolpost with 15 toolholders, a set of Myford "Quick-set" tooling with the carrying boat, 4-way toolpost, standard toolpost,  rear toolpost with a special +Q parting tool, fixed steady, travelling steady, ball-turning attachment, hand-operated spindle crank drive, tailstock die holder, thread-dial indicator, tailstock chuck, Myford floating tailstock chuck fitting, faceplate, set of faceplate clamps, catchplate with drive dogs, two bed stops, an indexing attachment to work from the spindle bullwheel, home-made coolant system, the maker's splash and chip guard over the motor, hard and soft Morse taper centres, chuck guard, LowVo light unit. Also included are two V-blocks by Eclipse, a 1-inch micrometer, vernier callipers, scribing block, the plugs for the cross slide, the maker's Operation & Maintenance & parts manual, a copy of the "Book of the Myford Series 7" and the correct Myford oil guns and headstock spindle adjustment spanners. Just fitted with a new inverter-controlled, infinitely variable-speed 3-phase motor - the original 1-phase motor is included. Reducing workshop due to the march of time.  If you want a really good, thoroughly well-equipped and carefully used Myford Super 7, this is it.  £4850

Pictures below are high-resolution and may take time to open
- hosted on www.lathes.co.uk -
- more advertisements here -