Harrison M300 Lathe
SOLD in pristine condition: Harrison M300 lathe 167 mm centre height and a capacity between centres of 635 mm. Mounted on the maker's cabinet stand with full coolant equipment, a full-length splashback, foot-stop emergency switch and low-voltage halogen lighting. Very well equipped including: dual inch/metric dials; 3-jaw Burnerd chuck; 4-jaw Bernard chucks and keys; quick-change tool post with 5 holders and keys; a new travelling steady; fixed steady; metric 3-gear thread-dial indicator; extra changewheels to extend the screwcutting gearbox range; catch plate; new headstock spindle reduction sleeve and Morse centre; tailstock revolving centre; tailstock Jacobs chuck; chuck guard; general spanner set and Allen keys. Swing over cross Slide : 210 mm (8.250 ") Spindle Bore : 38 mm (1.5" ) Spindle Nose : N. 4-D1. 12 speeds from 40 to 2500 r.p.m. Tailstock spindle has a Morse taper No 3 Spindle and a micrometer dial. Forward and reverse control is on the apron via a third-rod control. A thorough mechanical and cosmetic refurbishment has just been completed and the lathe is in great condition, turns parallel with an excellent finish - any inspection welcome - hosted on www.lathes.co.uk -
All gear boxes thoroughly cleaned out and checked Headstock gearbox refurbished with new lay shaft bearings, oil seals and o-rings 2 gears replaced with new. (To cure a slight tapping sound no visible damage to the original gears! Originals available for inspection) Now no odd noises and runs quietly in all ranges. Paint work re-finished to better than new standard . Oil replaced in all boxes with the correct grade. Saddle gaiter replaced.
3 phase electrics with no issues (3-phase converter available at extra cost.) Lifting facilities available and delivery also possible. £3750
Details of Harrison M300 lathes here
- more advertisements here -