email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Colchester Student 2500 Lathe

SOLD: Colchester Student 2500 gap-bed lathe: 170 mm centre height, 630 mm (25") between centres and a 40 mm spindle bore. This lathe was supplied new in 2006 to our Apprentice training shop and used infrequently for simple demonstrations of basic turning and consequently is very lightly used. Unfortunately machine tool training ceased after a few years and the machining section was left idle with the machines only being exercised for periodic inspection until disposal.  Very well specified and equipped with: 3-phase 2.2 kW (3HP) motor, D1-4 Spindle, 12 speeds  from 40 to 2500 rpm, dual Imperial and metric screwcutting and feeds gearbox, metric dials and lead screws. Equipment includes a 2-axis Digital Readout, coolant equipment, 3-jaw (165 mm) Burnerd chuck,  and 4-jaw (200 mm) Burnerd chuck, new and unused quick-change tool post and holders plus a parting holder, thread-dial indicator, chuck guard, full-length stand splash back, the correct Morse 5-3  taper spindle bush is included with a Morse 3 centre, tailstock revolving centre, Jacobs drill chuck, Low-Vo halogen light unit and a drawing holder. Machine can be demonstrated - located in Hampshire £5750.

- hosted on www.lathes.co.uk -
- more advertisements here -



email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Colchester Student 2500 Lathe

SOLD: Colchester Student 2500 gap-bed lathe: 170 mm centre height, 630 mm (25") between centres and a 40 mm spindle bore. This lathe was supplied new in 2006 to our Apprentice training shop and used infrequently for simple demonstrations of basic turning and consequently is very lightly used. Unfortunately machine tool training ceased after a few years and the machining section was left idle with the machines only being exercised for periodic inspection until disposal.  Very well specified and equipped with: 3-phase 2.2kw (3HP) motor, D1-4 Spindle, 12 speeds  from 40 to 2500 rpm, dual Imperial and metric screwcutting and feeds gearbox, metric dials and lead screws. Equipment includes a 2-axis Digital Readout, coolant equipment, 3-jaw (165 mm) Burnerd chuck,  and 4-jaw (200 mm) Burnerd chuck, new and unused quick-change tool post and holders plus a parting holder, thread-dial indicator, chuck guard, full-length stand splash back, the correct Morse 5-3  taper spindle bush is included with a Morse 3 centre, tailstock revolving centre, Jacobs drill chuck and Low-Vo halogen light unit. Machine can be demonstrated - located in Hampshire £5750.

- hosted on www.lathes.co.uk -
- more advertisements here -