email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

Sold
Granville Senior Lathe

Sold:  Granville Senior Lathe 4" x 20" gap-bed, backgeared and screwcutting. The lathe is in excellent working order - it was bought by my late father over 25 years ago - and has been used to make a number of  model steam engines. However, at some point prior to his ownership the headstock bearing cap was welded--but this has had no effect at all on the accuracy. The lathe is mounted on a good metal stand with cupboards and has a built-on all V-belt drive countershaft, 1-phase motor, guarded changewheels and a headstock belt cover. Extras include: a long T-slotted cross slide, two 3-jaw chucks, two 4-jaw independent chucks, 4-way toolpost (and the single toolpost fitted), three fixed steadies (one looks to be too large), a collet nose cap with some collets, thread-dial indicator, large faceplate, two spare chuck bookplates, catchplate, three angles plates (one a special 2-part type with a "nipping" V), 5 tailstock chucks, a collection of around 30 cutting tools, 6 drive dogs and a quantity of drills and turning tools. This is a compact but very strong little lathe.) Details of Granville lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -



email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

Sold
Granville Senior Lathe

Sold:  Granville Senior Lathe 4" x 20" gap-bed, backgeared and screwcutting. The lathe is in excellent working order - it was bought by my late father over 25 years ago - and has been used to make a number of  model steam engines. However, at some point prior to his ownership the headstock bearing cap was welded--but this has had no effect at all on the accuracy. The lathe is mounted on a good metal stand with cupboards and has a built-on all V-belt drive countershaft, 1-phase motor, guarded changewheels and a headstock belt cover. Extras include: a long T-slotted cross slide, two 3-jaw chucks, two 4-jaw independent chucks, 4-way toolpost (and the single toolpost fitted), three fixed steadies (one looks to be too large), a collet nose cap with some collets, thread-dial indicator, large faceplate, two spare chuck bookplates, catchplate, three angles plates (one a special 2-part type with a "nipping" V), 5 tailstock chucks, a collection of around 30 cutting tools, 6 drive dogs and a quantity of drills and turning tools. This is a compact but very strong little lathe. £375
Phone: 01482-669697  (Brough, Nth. Humberside
) Details of Granville lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -