email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Boxford AUD Mk.2  Lathe

SOLD:  Boxford 4 1/2" x 24" AUD Mk. 2 lathe metric-specification with screwcutting gearbox, power sliding and surfacing feeds, single lever engagement of backgear, spindle lock and mounted on the maker's underdrive stand with a splash-back and levelling feet. An ex-school machine with chuck guard and emergency foot stop switch. Very well equipped with: six chucks comprising a  4.5-inch self-centring 6-jaw, 5-inch Elliott 3-jaw, Pratt 4-inch 3-jaw, 4-inch TOS independent 4-jaw, 6-inch independent 4-jaw and a Morse taper No. 3 ER40 collet chuck (less collets). Fixed steady, travelling steady, quick-change toolpost complete with 11 tool holders, micrometer carriage stop, thread-dial indicator, a new 125 mm chuck backing plate; 5-inch catchplate, a new 9-inch faceplate, 2-way tool post, single American type tool post, ball-cutting attachment, keyless precision tailstock chuck and Morse centres. Also included is a full-metric-to-inch set of screwcutting changewheels: 135/127t, 40t, 56t, 44t and 52t. The original OEM low-voltage light is included (but not shown).
Fitted to the cross slide and tailstock are digital readers switchable to metric and imperial -  both quickly detachable.
This is a very smart, well-equipped and easy to maintain machine with no fault and ready for immediate use. 1 h.p. 1-phase motor and reversing switch. £980
Only selling because I'm going up in lathe size for next project. Details of Boxford lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -


email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Boxford AUD Mk.2  Lathe

SOLD:  Boxford 4 1/2" x 24" AUD Mk. 2 lathe metric-specification with screwcutting gearbox, power sliding and surfacing feeds, single lever engagement of backgear and mounted on the maker's underdrive stand with a full-length splash-back and levelling feet. An ex-school machine with chuck guard and emergency foot stop switch. Very well equipped with: six chucks comprising a  4.5-inch self-centring 6-jaw, 5-inch Elliott 3-jaw, Pratt 4-inch 3-jaw, 4-inch TOS independent 4-jaw, 6-inch independent 4-jaw and a Morse taper No. 3 ER40 collet chuck (less collets). Fixed steady, travelling steady, quick-change toolpost complete with 11 tool holders, micrometer carriage stop, thread-dial indicator, a new 125 mm chuck backing plate; 5-inch catchplate, a new 9-inch faceplate, 2-way tool post, single American type tool post, ball-cutting attachment, keyless precision tailstock chuck and Morse centres. Also included is a full-metric-to-inch set of screwcutting changewheels: 135/127t, 40t, 56t, 44t and 52t. The original OEM low-voltage light is included (but not shown).
Fitted to the cross slide and tailstock are digital readers switchable to metric and imperial -  both quickly detachable.
This is a very smart, well-equipped and easy to maintain machine with no fault and ready for immediate use. 1 h.p. 1-phase motor and reversing switch. £980
Only selling because I'm going up in lathe size for next project.

- hosted on www.lathes.co.uk -
- more advertisements here -