Maho 600 Universal Milling Machine
SOLD: Maho MH600A Universal Vertical & Horizontal Precision Milling Machine fitted with a 3-axis DRO by Accurite DRO. 18 spindle speeds from 65 to 1000 rpm in horizontal mode and 100 to 1560 rpm vertically. The vertical head can be swivelled through 360 degrees and has 70 mm of quill travel. The knee can be operated by hand or under power from an infinitely-variable drive to give feed rates from 7 to 250 mm per minute. Longitudinal and vertical feeds are 320 and 300 mm respectively. The essential "Swivelling and Tilting Angular Table" is fitted and can be tilted 45-degrees either side of horizontal, swivelled 30 degrees on its vertical axis and has a transverse feed (by screw) of 130 mm. - hosted on www.lathes.co.uk -
Both machine and DRO serviced by engineers when purchased and the table also stripped down and serviced in late 2015. Adaptor sleeves allow use of MT1, MT2 & MT3 tooling. Also included are the original maker's Operation & Maintenance manual, Test Certificates & Record Card.Coolant pump fitted.
Please note that the support arm for horizontal milling arbour was missing when I purchased this machine and there are some marks on the table. 3-phase electrics so ideal for conversion to inverter driven variable speed drive.
Details of Maho Millers here
- more advertisements here -