email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Myford ML7 Lathe with Emco Milling Head

SOLD:  Myford ML7 lathe 3.5" x 20 gap-bed, backgear and screwcutting and fitted with the very desirable clutch unit. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. Complete with a rear-mounted 1-phase Emco 4-speed vertical milling head with all-gear drive, fine and quick-action quill feeds and fitted with a Clarkson Autolock chuck.  A range of useful accessories is also included: 3-jaw chuck, the correct half-depth body 6-inch 4-jaw chuck, a "Cowells" capstan-handles tailstock spindle-drive attachment, rotating multi-position indexing carriage stop, thread-dial indicator, graduated handle to the leadscrew end, travelling steady, quick-set toolpost, 4-way toolpost, standard toolpost, wood-turning rest with the standard T and one for spinning work, angle plate, V-block, set of screwcutting changewheels and a number of turning tools. Variable-speed inverter drive by a European-made ABB inverter with a full programming panel running a 3/4 h.p. Crompton-Parkinson motor. Very well specified and maintained (new belts within the last month) and in splendid condition this ML7 is ready for immediate use. £1550
Details of Myford ML7 lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -



email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Myford ML7 Lathe with Emco Milling Head

SOLD:  Myford ML7 lathe 3.5" x 20 gap-bed, backgear and screwcutting and fitted with the very desirable clutch unit. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. Complete with a rear-mounted Emco 4-speed vertical milling head with all-gear drive and fitted with a Clarkson Autolock chuck.  A range of useful accessories is also included: 3-jaw chuck, the correct half-depth body 6-inch 4-jaw chuck, a "Cowells" capstan-handles tailstock spindle-drive attachment, rotating multi-position indexing carriage stop, thread-dial indicator, graduated handle to the leadscrew end, travelling steady, quick-set toolpost, 4-way toolpost, standard toolpost, wood-turning rest with the standard T and one for spinning work, angle plate, V-block, set of screwcutting changewheels and a number of turning tools. 1-phase electrics. Very well specified and in splendid condition this ML7 is ready for immediate use. £1450
Details of Myford ML7 lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -