email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Myford Super 7B Lathe

SOLD: an immaculate, little used Myford Super 7B lathe 3.5" x 19" with screwcutting gearbox and power cross feed. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. One very careful owner from new, this lathe has been kept in an inside, heated room and is in pristine condition. Included is an extensive range of genuine Myford accessories, mostly unused and complete with their maker's boxes, including: works installed 1-phase electrical equipment with armoured cabling, Dewhurst reversing switch and a halogen light unit, Burnerd 3-jaw chuck, the correct half-depth body Burnerd 6-inch 4-jaw chuck, metric conversion set for the screwcutting gearbox, dividing head with two extra plates by Chronos and the special raising block, swivelling vertical milling slide of the later 2-bolts-per-axis type, set of Dickson quick-set tool holders, standard toolpost, rear toolpost, bed-mounted longitudinal multi-stop, fixed steady, travelling steady, large micrometer dial on the carriage handwheel, saw table with accessories and cutter arbor, horizontal milling arbor; spindle indexing plunger, handle for rotation of spindle by hand, boring bar, large faceplate, standard faceplate, thread-dial indicator, catchplate, two angle plates, V-block, selection of standard and special Morse centres, tailstock to headstock spindle Morse adapter and a number of other, unlisted items. If you seek an as-new thoroughly well-equipped late-model Myford Super 7B at a very realistic price - this is it. £3500
Details of Myford Super 7 lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -




email: tony@lathes.co.uk
Home   Machine Tool Archive   Machine-tools Sale & Wanted
Machine Tool Manuals   Catalogues   Belts   Books  Accessories

For Sale
Myford Super 7B Lathe

For Sale: an immaculate, little used Myford Super 7B lathe 3.5" x 19" with screwcutting gearbox and power cross feed. Mounted on the maker's cabinet stand with deep chip tray and levelling blocks. One very careful owner from new, this lathe has been kept in an inside, heated room and is in pristine condition. Included is an extensive range of genuine Myford accessories, mostly unused and complete with their maker's boxes, including: works installed 1-phase electrical equipment with armoured cabling, Dewhurst reversing switch and a halogen light unit, Burnerd 3-jaw chuck, the correct half-depth body Burnerd 6-inch 4-jaw chuck, metric conversion set for the screwcutting gearbox, dividing head with two extra plates by Chronos and the special raising block, swivelling vertical milling slide of the later 2-bolts-per-axis type, set of Dickson quick-set tool holders, standard toolpost, rear toolpost, bed-mounted longitudinal multi-stop, fixed steady, travelling steady, large micrometer dial on the carriage handwheel, saw table with accessories and cutter arbor, horizontal milling arbor; spindle indexing plunger, handle for rotation of spindle by hand, boring bar, large faceplate, standard faceplate, thread-dial indicator, catchplate, two angle plates, V-block, selection of standard and special Morse centres, tailstock to headstock spindle Morse adapter and a number of other, unlisted items. If you seek an as-new thoroughly well-equipped late-model Myford Super 7B at a very realistic price - this is it. Located Baslow, Derbyshire. £3500 Phone: 07825-969292 Details of Myford Super 7 lathes here

- hosted on www.lathes.co.uk -
- more advertisements here -