For Sale Holbrook EDGAR lathe 5" x 21" backgeared and screwcutting with large capacity gap bed. This is a very high quality and interesting machine with a bed was of the "double-way" type, with the headstock and tailstock mounted on a separate rear section - with one flat and one V - whilst the carriage runs on a flat (gibbed) front ways and is able to pass completely by the tailstock. In addition the front bed pivots at the headstock end and can be set over, under the influence of two screws, to allow the carriage to run out of parallel with the headstock spindle axis by an amount equal to 1/2" per foot in either direction.
Complete with a collet set, very large faceplate, 3-jaw Taylor taper-scroll 3-jaw chuck, 8-inch half-depth body 4-jaw chuck, 5-inch 4-jaw chuck, fixed steady, "Keats" angle plate for mounting work on the faceplate, V-blocks, angle plate and a number of milling and turning tools, etc. Also included is the proper fast-and-loose countershaft assembly. £550   Phone: 01548-821324 or mobile: 0771-7257076 
Details of Edgar lathes here.