|
SOLD: 3.5" x 19" Myford Super 7B with Screwcutting Gearbox and Spindle Clutch and 1-phase motor. Mounted on the maker's Industrial Stand with built-in switchgear, reversing switch, push-button starter, chip tray and raiser blocks. Extremely well equipped including: Myford boxed COLLET SET 1/8 to 1/2 inch with loading tube and spindle nosepiece; POTTS MILLING ATTACHMENT; KEATS ANGLE PLATE, 1 off BURNERD DIVIDING HEAD with 4 inch 3-jaw chuck, two off Burnerd Super-precision adjustable GRIP-TRU 3-jaw chucks, the proper Burnerd 6-inch half-depth body 4-jaw chuck, a 4-inch self-centring 4-jaw chuck and a Burnerd 3.5-inch 4-jaw independent chuck. Myford rotating multi-stop unit for the carriage, large faceplate, standard faceplate and a catchplate. Fixed steady, travelling steady and a large-capacity (Dore type by Model Engineering Services) 4-point fixed-steady kit in box that will hold work up to 5-inches in diameter. Radius-turning attachment, 4-way toolpost, rear toolpost, Myford angle plate, thread-dial indicator, graduated handwheel to leadscrew end, Seco Grinding attachment, 3 tailstock chucks, 3 off tailstock die holders, a set of 1/8th to 1" taper mandrels for work holding, slitting saws, a large collection of Morse taper centres, light unit, maker's oil guns. Other items and tooling include: 1 off boxed set of Clarkson Autolock Mills 1/8 to 3/4 inch sizes. 5 off 2-MT End Mills, 2 off boxes of Woodrow Key Cutters sizes No. 1 to No. 11, 1 off Clarkson Collet Chuck for Milling Cutters. 1 off boxed set of Clarkson Spiral Slot Drills for Autolock Collet Chuck sizes 1/8 to 3/4 inch, 1 off box of No 1MT counterbores, 4 off medium Woodrow Key cutters. 5 off assorted parallel End Mills, 1 off Jacobs 3/16 to 3/4 No 3-MT chuck. 1 off No 3-MT x 4-MT converter. 1 off 5-MT x 4-MT converter. 1 off 4-MT x 2-MT converter. 1 off 3-MT x 2-MT converter. 1 off 2-MT x 3-MT converter. 1 off Parallel x 1-MT adapter. 20 off turning tool bits. 2 off 5/8 inch boring bars. 2 off 1/2 boring bar, 1 off 3/8 boring bar, 1 off set of miniature boring bars, 6 off 1/2 inch carbide turning tools, 20 off assorted centre points, 6 off countersinks with pilots, 10 off assorted miniature tool bits, 10 off assorted thread chasers, etc. Also included is a compound slide unit from a Smart and Brown Model L lathe and a set of spare Myford Super 7 clutch parts. One owner for many years and in excellent working order. £1750 |
